Concrete Leveling Before & After Photos

Jeff noticed the beginning stages of his back patio starting to become uneven as the soil beneath it was causing it to separate. He made the right call by choosing Ayers to come fix it. We decided on installing PolyLevel and NexusPro Joint Sealant after an inspection was made. The PolyLevel solution will raise and level the concrete with the small, lightweight, foam injections we make in the slab. Then we use NexusPro Joint Sealant to actually fill and seal the cracks so that water or debris won't degrade the slabs from below. These are permanent, waterproof solutions and will get the job done much faster. Jeff was happy to get this problem area smoothed out to avoid this tripping hazard!

Tyler W. was looking for a permanent solution for the settled sidewalk outside of his home. The sidewalk settled because of weak soils beneath the concrete slabs, and without an effective fix, the issue would continue to worsen over time. We used the specialized polymers in the PolyLevel system to raise and level the sunken slabs. The polymers were injected into the concrete and then expanded to lift it back to its proper level. With its quick 15-minute cure time and neutral color that matches most concrete shades, this system was an ideal solution for Tyler.

Scott and Lori have settled concrete in the driveway, front porch, and back porch. They were painting the exterior and updating the home so they wanted to add concrete repair to their list of fixes. PolyLevel was used to lift and level the sunken concrete. To seal the cracks and joints of the concrete, we used NexusPro Joint Sealant. Both cure in a short amount of time so the process won't be an inconvenience to the homeowners!

A business’s cement floor had dropped at least half an inch which created tripping hazards. So we installed PolyLevel which is a system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

A company's sidewalk was unenven and craking in front of their building. So they called our team and we installed PolyLevel, a system that fixes settlement issues in concrete slabs. A polyurethane foam that expands and has a high density is used in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.