Concrete Leveling Before & After Photos

Rodney had some sunken concrete in his walkway to the front porch and the porch was sinking too. We used PolyLevel to level the concrete for both. PolyLevel is an injectable foam that is light weight and waterproof. You can be on the concrete in a short period of time since this foam takes only 15 minutes to cure.

Rodney had some concrete in his driveway that had sunk. We used PolyLevel to lift the concrete and restore it to the original level. PolyLevel is a strong, light weight foam that is injected under the fallen concrete. The foam is waterproof and stable so it won't wash away or react with the soil. The best part is that it cures in about 15 minutes so the driveway is full load bearing in just a short amount of time.

Uneven concrete was making snow blowing a challenge and causing chips along the edges of this customer's driveway. Concerned about further damage from harsh weather, they turned to Ayers for a lasting solution. Using PolyLevel, we leveled the driveway slabs for a smooth surface, and NexusPro sealant was applied to protect the joints from future wear. The result? A driveway that’s easy to maintain, weather-protected, and looks like new! The customer couldn’t be happier with the transformation.

Don't let uneven sidewalks leave you feeling stressed out. With new technology we can fix those uneven sidewalks or cement slabs easier than ever before. We inject structural grade polymers beneath the cement which will lift the slab back to its desired height. The polymers are waterproof so you don't have to worry about them washing out, once injected they are there to stay. The hole we have to drill to inject the polymers is smaller than a penny and barely noticeable. The best part is this system only takes about 15 minutes to install so there is almost no down time and you'll be back driving on your driveway in no time. 

We recently received a call from a customer in Williamsburg. They called us to inform us about their driveway and how part of it seemed to be sagging and felt like a pothole when driving on it. We drove to the house so that we could install our PolyLevel technology in order to fix their driveway. PolyLevel is an advanced polymer injection foam that we blast into the concrete through these little tiny holes in order to re-level and strengthen the concrete so that it is even better than new. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.