Concrete Leveling Before & After Photos

We got a call from a business in Grand Rapids that needed help leveling their concrete, because they didnt want to break the bank getting a new walkway. We drove to grand rapids and decided to install our PolyLevel technology, which is an advanced polymer injection foam that we blast into the concrete to re-level it and reinforce it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

This Comstock Park couple had some concrete in their driveway and walkway that was starting to settle. This was causing both areas to be uneven and it was creating a trip hazard as well as collecting water in spots that should not be. We used PolyLevel and NexusPro to raise the concrete and seal the cracks. Both cure in a short amount of time so the concrete leveling system is not inconvenient to the homeowners!

Have you ever driven up the driveway and up to the garage, but in order to get into the garage you have to get over "the bump"? Well at Ayers, we know how to get rid of "the bump" and you'll see the results. One customer in Mendon had to drive over "the bump" to get into the driveway... so she called us. We drove to her property and installed our advanced PolyLevel technology.

Poly Level is a polymer injection foam that we blast into the concrete tiny holes that are smaller than dimes. One of the PolyLevel is injected, the concrete raises to its original position and becomes stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

A customer needed help leveling his concrete patio and sidewalk so he called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

The path of the employee entrance to this business was uneven and unsafe, so the owner called on us to raise and restore the concrete slab. A few PolyLEVEL injections and the entrance is level and safe.