Ayers Basement Systems Before & After Photos

A customer had water flooding his basement because his current sump pump couldn't keep up with the amount of water in his basement. So he called our team and we installed TripleSafe. This system provides ultimate protection because it has three pumps in order to handle your highest pumping demands. In addition, it has a battery powered pump so that the system continues to work even during power outages. 

We received a call from Lisa in Muskegon saying that one of the concrete slabs towards the end of her walkway had sunk. This sounds like a big problem for Lisa, but luckily for her, we have our PolyLevel injections. Our PolyLevel injections are designed to last long and take on very heavy loads without failing. 

Many foundation lifting techniques can be very messy and disruptive, but with our PolyLevel, it's quick, clean, and ready to be used right away. It only takes PolyLevel around 15 minutes to cure, and after that, full loading of the foundation can happen.

Each case is different in terms of how many injections we make. In this particular case, we only had to make two injections. However many injections need to be made, we will get the job done and make sure that your concrete slab, sidewalk, etc. is back to being level.

Matt in Muskegon gave us a call saying that water was beginning to get into his basement with large rain falls. After going out for our free inspection, we realized that he had a drainage issue. To fix this, we installed our WaterGuard.

WaterGuard is a perimeter drainage system that is placed on top of the footing. Most perimeter drainage systems are placed alongside the footing, but doing it that way makes it susceptible to mud getting in and clogging it. Being on top of the footing is a huge advantage, because it is no longer sitting in the mud; it's on top of it, which obviously makes it much harder for mud to get in.

As you can see, to start out we have to jackhammer out the trench where the WaterGuard will fit into. After this, we place drainage stone above the footing to help aid the waterproofing process. 

Once the WaterGuard is installed, we then fill the trench back up with concrete, making the drain virtually invisible, and completely out of the way.

Luanna needed help keeping water from entering her crawl space. She believed it was coming from her neighbor's discharge line so she called our team. We installed CleanSpace, an uninterrupted vapor barrier. This material is applied to the walls and floor of your crawl space. It restricts all moisture, outside air, and pests from entering your crawl space. This system creates an energy-efficient crawl space, and it also gives your crawl space a clean finish. 

A customer had cold air and moisture leaking into her crawl space so she called our team for help. Small cracks and seams can exist around rim joists, but after insulating them all of those cracks are sealed off. Now airflow and moisture is restricted keeping outside air and moisture out and inside air and moisture in.