Ayers Basement Systems Before & After Photos

A customer in Muskegon had a walkway that was no longer flat and level. They knew that we had the power to fix it so they gave us a call. We, drove over there and installed our PolyLevel technology which is an advanced polymer injection foam that we blast into the concrete to level it out and make it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Homeowners had a bowing basement wall due to heavy water intrusion. So our team installed PowerBrace, a foundation repair system created to secure basement walls in place. Outside pressures can often cause your basement walls to crack or tilt, this foundation repair system counteracts these pressures by keeping your basement walls in place. Over time, the system can be tightened to not only secure the walls in place, but to also straighten them.

Jane’s concrete floor in her garage was cracking so she called our team. We installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Have you ever seen a sidewalk that looks like its falling apart, its pretty ugly right? Well, it's also very unsafe. We got a call from a church referring to their unsafe sidewalks. We knew exactly how to fix it which is done with our PolyLevel technology.

PolyLevel is an advanced polymer-based injection foam that we blast into the concrete through tiny little holes that are smaller than a dime. This foam will raise the concrete back to its original level and make it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Mark from Muskegon, MI needed his basement waterproofed. After going out for our free inspection, we decided that the best case of action was to suggest to Mark that we install our WaterGuard Below Floor Drain.

As its name states, WaterGuard rests below your floor slab, but on top of the foundation footing. This is important because now that it’s on top of the footing, mud will not get into the drain and clog it, simply because the drain is not sitting in the mud. The WaterGuard also has a drain outlet directly to the sump pump and will not cause any damage to the foundation. Also, since it's installed below the floor slab, you won't even be able to notice that it's there once it's completely installed.

There simply isn't an interior waterproofing system that is more efficient and longer lasting than our WaterGuard system, so if your basement is in need of some waterproofing, pick up the phone and give Ayers a call!