Wyoming, MI's Expert Basement Waterproofing & Foundation Repair Company

• Basement flooding
• Wet basements
• Damp or moldy basements
• Leaking foundation cracks
• High basement humidity
• Uncomfortable temperatures

Moisture intrusion problems, such as basement flooding and leaks, can cause mold growth. Eventually, mold can lead to poor indoor air quality, foundation problems, decaying beams and joists, and structural failure.

Whether your basement has leaking wall cracks, leaking basement windows, high water table, or burst pipes, Ayers Basement Systems provides guaranteed solutions to keep the basement dry, including:

• Hidden drainage systems are installed along the perimeter of the basement floor to collect water and direct it to a sump pump.
• Sump pumps move water out of the home and away from the foundation.
• Dehumidifiers control basement humidity, which prevents mold and wood rot.
• Replacement windows for better energy efficiency and to prevent leaks around damaged components.

These are just some of the factors that can cause flooding and moisture intrusion in the crawl space:

• Poor exterior grading
• Faulty gutters and downspouts
• Freeze-thaw cycles leading to expanding and contracting
• Snowmelt oversaturating soil
• Hydrostatic pressure
• High humidity
• Soil shrinkage and foundation settlement
• Plumbing leaks
• High groundwater levels

• Wood rot can deteriorate floor joists and beams and lead to sagging floors. Crawl space water can erode the soil around the foundation and cause settling and floor and wall cracks.
• Moisture causes nails, fasteners, and ductwork to rust and corrode, which compromises the foundation’s strength.
• Dampness creates the perfect environment for mold, which can spread to wooden beams, eventually causing decay.
• Moisture can attract termites, carpenter ants, and other pests that may feed and burrow into wood and weaken structural elements.

Ayers Basement Systems uses the crawl space encapsulation system by CleanSpace to prevent flooding and moisture intrusion. Here's how it works:

• We will install a thick, vinyl moisture barrier on the crawl space floor and walls.
• We seal vents to keep moisture and outside air from entering the space. 
• We may also install a drainage system and sump pump to take care of any standing water or flooding problems. 
• We will install a dehumidifier to condition the space.

• Frequent freezing and thawing cycles when going from summer to winter cause soil expansion, leading to foundation cracks, bowing walls, and settling.
• The lake-effect snow from the proximity to Lake Michigan and heavy spring rains can lead to water seeping into the basement or crawl space, causing flooding and structural damage.
• The moisture issues combined with the warm, humid summer temperatures create the perfect environment for mold growth, musty odors, wood rot, and efflorescence.

Some foundation problems, like minor cracks, might not affect the structural integrity of your home. As a foundation specialist, we will evaluate the situation and recommend the best solution. We offer a wide range of foundation repair solutions, including:

• Wall Anchors stabilize leaning and bowing walls while preventing further movement.
• Wall Braces will hold leaning or bowing walls in place and prevent further movement.
• Foundation & slab piers are driven into the ground into stable load-bearing soil to lift and stabilize settling foundations.
• Pier & beam jacks are adjustable house jacks meant for crawl space or pier and beam foundations. They correct sagging floors by being placed under beams to provide permanent support.
• Concrete leveling using innovative solutions to stabilize sinking concrete slabs.
• Whatever structural problem you have, Ayers Basement Systems can fix it. Give us a call to schedule a foundation inspection and free cost estimate.

As the local Supportworks dealer, Ayers Basement Systems provides proven foundation repair solutions backed by an international network of industry professionals. This partnership allows us access to warrantied products, best practices by real foundation repair experts, and professional training.

Contact us to see why there is no one better to fix your foundation! Call 1-844-262-2971 or contact us online to schedule an inspection.

Here's how PolyLevel® works: We first drill penny-sized holes in the slab to access the voided areas underneath. An expanding foam is pumped into the holes, filling the voids, and raising the sunken concrete slab to its original level. Finally, the holes are filled and patched. Depending on the size of the slab, full use of the slab can begin just 15 minutes after the process is complete!

• The lightweight polyurethane foam in PolyLevel expands and hardens for an accurate lift while mudjacking uses a heavy water, soil, sand, and cement slurry mixture.
• Non-invasive, quick-to-install PolyLevel uses an expanding foam injected through small 5/8 inch holes to fill voids and raise slabs. Mudjacking requires larger holes, 1 to 2 inches, with the slurry being pumped under. The weight and consistency of this slurry are often messier.
• PolyLevel cures in under an hour while mudjacking can take up to 24 hours or more.
• Since PolyLevel is lightweight, it ensures more precise lifting because it won't add unnecessary weight to the slab. The heavy slurry from mudjacking adds extra weight, which is a problem where soil contraction is a concern.
• PolyLevel is resistant to moisture and has less risk of re-settlement over time, making it the more durable option. The slurry from mudjacking can absorb moisture, which can lead to more settling and less stability.

When you address damaged concrete quickly, you prevent future damage by:

• Eliminating water infiltration that can lead to expansion and additional damage through cracked concrete repairs.
• Protecting against wear, freeze-thaw cycles, moisture, chemicals, UV rays, abrasions, and more by adding a barrier to the surface of slabs with concrete sealing.

The types of concrete surfaces we repair include:

• Driveways
• Patios
• Walkways
• Garage floors
• Interior floors
• Warehouse floors
• And more!

The cost of installing an egress window depends on your property, the work being done, the foundation type, excavation requirements, window size and style, whether you also need well and drainage system equipment, and local code compliance. If you want to learn more, schedule a free service estimate with Ayers Basement Systems. We will provide you with an accurate idea of the cost.

We found that a building permit is needed in most cases, especially if it involves cutting into the foundation. Size, clearance, and accessibility requirements according to local building codes will ensure the window serves as a safe emergency exit. The professionals at Ayers Basement Systems ensure your project is up to code, which helps you avoid issues during future home inspections or sales.

We can help handle the permit process and ensure a safe, code-compliant installation. Schedule a free estimate to learn more!

We can install egress windows in existing basement walls, including concrete or block foundations. During the installation, we carefully cut the foundation, establish proper structural support, and add drainage and waterproofing equipment to prevent future leaks. Hiring the professionals at Ayers Basement Systems ensures durable results that will bring natural light, ventilation, and code-compliant safety to your basement!

From the first call to the installation, we are there for the entire process. Get a free estimate to learn more!