Jesse

Sinking concrete is always a nuisance, especially if it's within your driveway. For the Sollars, they wanted this issue taken care of right away! With Ayers Basement Systems, we can fix sinking concrete with the use of PolyLevel, which elevates concrete from below the surface with a polyurethane foam.

A customer in Jackson had some unlevel steps and walkway in his front yard. We came to the rescue with our PolyLevel technology. We injected this expanding polymer into the concrete slab which then supports and levels the concrete stronger than ever, within minutes. Now that this walkway is level. The homeowner can have peace that nobody will trip due to unlevel concrete at their home.

This Okemos homeowner had a driveway with about half of the slabs are sinking. It causes some issues with driving and walking due to the unevenness. We decided to use PolyLevel to raise the slabs sunken concrete slabs back to the original position. PolyLevel is a light weight injectable foam that is waterproof so it won't wash away. It also cures in about 15 minutes so it won't be inconvenient to the homeowners.

The sidewalk to the homes front door has sunk about 2 inches in a couple different spots. They have used us to level concrete before and knew we could fix the uneven trip hazard. We used PolyLevel to raise the fallen concrete back to the original level. PolyLevel is a light weight but very strong foam that is injected under the concrete. It is waterproof and stable so it won't wash away or react with the soils. The best part is that is cures in such a short amount time that it will not disturb that homeowners.

This customer has some concrete slabs in his walkway that were uneven and his stairs were separating from the walkway. He wanted this to be fixed so that water wouldnt get under the stairs and so no one would trip. We installed PolyLevel to fix the sunken concrete. PolyLevel is a strong but light weight foam that is used to raise driveways, sidewalks, and walkways. It is waterproof and stable so it won't wash away or react with the soil. PolyLevel also has a quick curing time so it doesn't cause any inconvenience to you or your space.

Jason and Kristin had concrete on their front walkway that had sunk making the path very uneven. The bottom step has also settled and dropped making the stairs uneven. They wanted all the concrete to be level so no water could get underneath and make it worse. We used PolyLevel to raise the concrete back to the original level. PolyLevel is a strong but light weight foam that is injected underneath the concrete slabs. This foam is waterproof so it wont wash away and it cures in only 15 minutes so the homeowners don't have to worry about not being on it for an extended period of time!

Julie called us when she noticed that a slab in her walkway was lifted, causing a tripping hazard. She wanted to add handrails to the steps but needed the walkway to be level first. We used PolyLevel to lift the concretet back to where is should be. PolyLevel is a very light but strong foam injectable. It is waterproof so it won't not wash away, it doesn't react with soil or moisture, and it has a curing time of 15 minutes so there is minimal disturbance.

Tom and Susan had some sunken concerte on the back porch. They wanted a fix for the uneven concrete. We installed PolyLevel foam to bring the concrete back to the original positiion. PolyLevel is an injectable light weight foam that is strong and durable. The foam is waterproof and stable so it won't wash away or react with the soil. Lastly, PolyLevel has a curing time of only 15 minutes!

These East Lansing homeowners had sunken slabs in their driveway and they needed a fix so they called us. We used PolyLevel to raise the sunken concrete and give the homeowners peace of mind that their driveway issues were gone! PolyLevel is an injectable foam that is light weight but strong. It is also waterproof and stable so it wont wash away or react to soil. The best part is that the driveway can be full load bearing in about 15 minutes!

The Michigan Surgical Center in East Lansing has a sunken concrete slab of concrete by one of the doors. The concrete slab had sunken so much that the door doesn't touch the floor where it locks. We used PolyLevel to lift the concrete back to the original position so that the door latch and the hole could connect. PolyLevel is a light weight injectable foam that is waterproof so it wont wash away from under the concrete. The walkway, driveway, or sidewalk can be full load bearing in only 15 minutes after being installed.

Bob had a large crack where the driveweay and garage connect. The concrete slab of the driveway sunk and Bob was afraid that it would get much worse. We injected PolyLevel to fix the settling issue and to make sure the driveway was level with the garage. PolyLevel is a lightweight foam that is strong enough to hold up the weight of vehicles. The foam is water proof and stable so it won't wash away or react with soil. PolyLevel has a quick curing time of only 15 minutes so it wont impact your day.

Lind contacted us to fix her unlevel sidewalk concrete slabs. We used PolyLevel to raise the sunken slabs and get rid of the trip hazzard. PolyLevel is a lightweight injectable foam that is waterproof so it won't wash away. It also cures in about 15 minutes so that it wont disrupt your day.

This homeowner had settled concrete near the corner of his garage. His front steps and the porch have also dropped. We used PolyLevel to lift the concrete and help with his settlement issues. PolyLevel is a lightweight but strong foam. The foam is waterproof and stable so it won't wash away or react with the soil. The best part is that it cures in about 15 minutes.

This driveway in Laingsburg, Michigan wsa not level which made it hard to drive on. So, we solved the problem quickly with our PolyLevel technology. PolyLevel is a modern way to lift concrete that results in a more permanent result. It is done by a super tiny injection into the concrete that lifts it up and supports it better than ever before. This driveway is now smooth as silk.

Chuck and Eva had some sinking concrete between the back porch and the pool. It was a hazard to have the uneven concrete so they called us for a solution. We injected PolyLevel to lift the sunken slabs and level to are by the back porch. PolyLevel is a waterproof foam that cures in just 15 minutes so it doesn't distrub the homeowners!

Ron's walkway to the front porch was sinking and causing a tripping hazard with the unlevel concrete slabs. We used PolyLevel to even the slabs and remove the trip hazard. PolyLevel is a light weight foam injectable that is very strong. It is waterproof so it wont wash away and it is stable so it wont react with the soil. PolyLevel foam has a quick curing time so it wont inconvenience you, the concrete can be full load bearing in just 15 minutes.

PolyLevel is a state of the art approach to repairing sinking concrete. This method to raise your concrete slab uses high-density polymers to lift it back to the desired position. This process is done by drilling small holes (smaller than a penny), in the slab and then specially designed equipment with inject the structural grade polymers into the voids. 

There are many advantages to using PolyLevel: there are less holes, it's lightweight, it has a quick cure time so it can be driven on within 15 minutes, the material is waterproof and won't wash out, and it gives you peace of mind knowing no one will be tripping in your driveway. 

We received a call from a customer in Dewitt referring to her walkway and how unlevel it was. She wanted our professional help to get the job done. We drove to her home to install PolyLevel which is an advanced polymer injection foam that we blast into the concrete slabs through tiny little holes in the concrete. The foam levels it all out while making it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

There were huge cracks and uneven spots around Steve's pool. So he called our team and we installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk by a polyurethane foam. This foam expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

This homeowner had some concrete on the sidewalk leading to their front door that was not level. He was worried about it being a tripping hazard for people walking to the door. We had an easy, fast solution for them! We used PolyLevel to lift up the fallen concrete and take away the risk of someone tripping. PolyLevel is an injectable foam that goes under the concrete to help lift it back up the original position. It is waterproof so it won't get washed out and it wont drain harmful chemicals into the soil. The best part is that PolyLevel cures in about 15 minutes so it won't disrupt the homeowner or the home!

Rodney had some sunken concrete in his walkway to the front porch and the porch was sinking too. We used PolyLevel to level the concrete for both. PolyLevel is an injectable foam that is light weight and waterproof. You can be on the concrete in a short period of time since this foam takes only 15 minutes to cure.

Rodney had some concrete in his driveway that had sunk. We used PolyLevel to lift the concrete and restore it to the original level. PolyLevel is a strong, light weight foam that is injected under the fallen concrete. The foam is waterproof and stable so it won't wash away or react with the soil. The best part is that it cures in about 15 minutes so the driveway is full load bearing in just a short amount of time.

Kirk and Dyna needed help leveling their concrete driveway so they called our team for help. We installed PolyLevel, a long-lasting and waterproof system that fixes uneven concrete slabs. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Alan and Janet needed the concrete in their garage fixed in order to prevent their wall from bowing. So we installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

Robert contacted our team because his driveway and sidewalk were settling. We installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to raise the concrete. It is a simple process and is done by drilling small holes into the concrete and then inserting the foam into the holes.

A customer from Portage came to us with a driveway that was no longer level. They needed help so they called us. We drove over to their house and installed our PolyLevel technology. PolyLevel is an advanced polymer injection foam that we blast into the water though little holes in order to make it level and stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.

Nobody likes it when their sidewalk is all jagged and out of place. It creates a tripping hazard which could effect anyone approaching your front door. However, with PolyLevel we can raise your sidewalk slabs so that they can be all even and flat, and with NexusPro Crack Repair we can fix any cracks caused by the concrete sinking.

Geeta needed help leveling her porch because a concrete slab was sinking. So our team installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

This homeowner called for a solution to the unevenness in his settling driveway. We used PolyLevel which is a strong but light weight foam. This foam is waterproof and stable so it won't wash away or react with soils. It cures in about 15 minutes so it is full load bearing in a short period of time. We then used NexusPro Crack Repair to seal the cracks that formed from the concrete falling. NexusPro prevents water and debris from degrading the slab from below. It is a silicone-based filler and specifically designed to withstand harsh weather. Like PolyLevel, its drying time is quick and it dries in about an hour.

This condo complex had some porches that had settled so they wanted them lifted as well as the cracks fixed. We used PolyLevel to lift the porches back to the original position and then NexusPro Crack Repair to fix the cracks in the porch. PolyLevel is an inject-able foam that is waterproof and stable. It cures in about 15 minutes so that it won't disturb the homeowners. NexusPro is a silicone-based and designed to withstand harsh weather, it is UV resistant and won’t crack, bubble, or dry out. It prevent water and debris from degrading the slab from below and dries in about an hour.