Levi

A lot of water was entering Nick and Pam’s basement through their walls. So our team installed the CleanSpace Basement Finishing Wall System to prevent any more water intrusion. Using a poly sheet material to completely cover basement foundation walls this system acts as a vapor and moisture barrier. The material is waterproof, stain resistant and can be applied over many different types of surfaces. This system was perfect for Nick and Pam and put a stop to all water intrusion into her basement immediately.

This homeowner has a walkway to the front door that has sunk and is uneven now. They were worried that it would get worse or cause a tripping hazzard so they called us. We used Polylevel to lift the concerete slabs back to the original position. PolyLevel is a strong, light weight foam that is injected under sunken concrete slabs to lift it back up. The foam is is waterproof so it will not wash away and it is stable so it wont react with soil or moisture. It installs quickly with a curing time of abotu 15 minutes, won't disrupt other slabs, and not invasive to your space.

Bob had a large crack where the driveweay and garage connect. The concrete slab of the driveway sunk and Bob was afraid that it would get much worse. We injected PolyLevel to fix the settling issue and to make sure the driveway was level with the garage. PolyLevel is a lightweight foam that is strong enough to hold up the weight of vehicles. The foam is water proof and stable so it won't wash away or react with soil. PolyLevel has a quick curing time of only 15 minutes so it wont impact your day.

A company's sidewalk was unenven and craking in front of their building. So they called our team and we installed PolyLevel, a system that fixes settlement issues in concrete slabs. A polyurethane foam that expands and has a high density is used in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting. 

Foundational issues were becoming prevalent in Cody and Jasmine’s home so they called our team. We installed SmartJack, a system produced to halt your sagging floors. Floors above crawl spaces are vulnerable due to the moisture and soils in your crawl space. The SmartJack system is a permanent fix to these issues. It uses steel columns, threaded rods and a solid base to address any issues your crawl space may introduce to your floors. Installing this system usually takes less than a day and it provides immediate stabilization.

A customer needed help leveling his concrete patio and sidewalk so he called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

The concrete curbs outside Mike’s store needed fixed. He called our team and we installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk. A polyurethane foam that expands and has a high density is used in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

The concrete in front of Virginia’s house was cracking and uneven. So our team installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a polyurethane foam. This foam expands and has a high density in order to raise the concrete. The process is waterproof and long-lasting and is done by drilling small holes into the concrete and then inserting the foam into the holes.

As you can see, this Battle Creek home had a bowing wall in the basement that they wanted fixed. We installed CarbonArmor to the wall to keep it from cracking and moving further. CarbonArmor includes flexible carbon fiber straps that are stronger in tension than steel. The straps are bonded to the interior face of the wall using a high strength resin. This system requires no exterior excavation, installs quickly, and won't impact future basement finishing.

Water was entering a homeowner’s crawl space so he called our team to discuss encapsulation options. We installed SilverGlo, a set of waterproof foam panels. This system is used on the walls of your crawl space in order to insulate it. Uninsulated crawl spaces cost you money each year by increasing your heating and cooling bills. SilverGlo blocks all moisture and is made of inorganic material which prevents mold, rot or mildew from forming. Overall, it will keep this homeowner’s crawl space dry and insulated which will save him lots of money over the years.

Jerry was having some issues with moisture in his crawl space and wanted it closed off.  We first laid down drainage matting which has dimples to direct the flow of water to the sump pump. Next, we installed the CleanSpace liner which is a thick durable liner similar to a pool liner. The CleanSpace Vapor Barrier prevents water vapor and humidity from passing through. It keeps your crawl space dry which protects your structure and insulation from mold and rot. We then insulated the crawl space with SilverGlo which contains graphite particles to increase insulating properties and make sure his house stayed warm in the cooler months.

This Battle Creek homeowner had some moisture issues in their crawlspace. When it was windy, there was a draft in the basement that the owner wanted looked at too. We inspected the home and had just the solution for the issues the homeowner was facing. First we laid down Drainage Matting in the crawl space which is a mat with dimples to allow the flow of water to the sump pump. Then we laid down CleanSpace which is a very thick liner that is installed to keep moisture, water, and pests out of the area. Now the homeowner has a clean, dry crawl space with no cold drafts coming into the basement!

Micheal had very unlevel concrete slabs in his driveway so he called our team for help. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting. 

Mike's driveway is made of concrete and the slabs were uneven and cracking. So he called our team and we installed PolyLevel. PolyLevel is a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Two parts of Frank's sidewalk were uneven and causing people to trip so he called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

A customer had concrete slabs that were sinking in her back patio so she called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

This driveway has an area on the corner where the driveway meets the garage that had fallen about 3/4 inches. The owner wanted a fix because he did not want it getting any worse. We used PolyLevel which is an inject able foam to raise the concrete slab back to the original position. PolyLevel is waterproof and stable so it will not wash away or react with soils. The foam cures in about 15 minutes so you can be back in the garage and on the driveway in no time!

Janet’s workplace needed the sidewalk leveled so she called our team. We installed PolyLevel, a long-lasting and waterproof system that fixes concrete slabs by lifting them up to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting a polyurethane foam into the holes. This foam expands and has a high density in order to lift the concrete slabs.

Mary’s front porch was sinking and cracked, so our team installed PolyLevel. PolyLevel is a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

This Kalamazoo homeowner had a front porch that was sinking and cracked. We used PolyLevel to lift the porch back to where it should be and then used NexusPro Concrete Repair to fill in the crack and make sure it did not get bigger. PolyLevel is a lightweight foam that is injected under the concrete to lift it up. It is waterproof and stable so not washing away or reacting with soil. It also cures in about 15 minutes so you can be back on it in no time! The crack repair is a silicone-based filler that is designed to withstand harsh weather and remain flexible and it dries in an hour!

Troy and Jeannie's were having issues with their sidewalk and driveway. They both have been sinking for a while and currently have sunk about an inch. Troy and Jeannie eventually called our team for help so we installed PolyLevel. PolyLevel is a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

The concrete floor of Bernard and Debra’s garage had shifted and sunk. So our team installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

A customer had issues with the concrete in front of his house so he called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using  polyurethane foam. This foam expands and has a high density in order to raise the concrete back to its original position. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

John's driveway needed to be lifted because it was sloping towards the garage. This was causing a gap between the concrete driveway and garage. So he called our team and we installed PolyLevel. PolyLevel is a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Tim's garage had cracked and sunken in a little in the corner so he called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

A customer needed help lifting part of her driveway to make it level so she called our team. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

Concrete around Larry’s pool has started to sink and needs attention, so our team installed PolyLevel. PolyLevel is a system created to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to raise the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. In addition, the PolyLevel system is waterproof and long-lasting.

Bill needed help leveling one of his concrete slabs in his driveway. So he called our team for help and we installed PolyLevel, a waterproof and long-lasting system designed to fix concrete slabs that have sunk. It uses a polyurethane foam that expands and has a high density in order to lift the concrete slabs back to their original level. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes.

Nancy's concrete sidewalk was sinking so she called our team for leveling help. We installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.

The enclosed front porch of Terri's house was sinking and the floor was beginning to crack. So he called our team and we installed PolyLevel, a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is quite simple and is done by drilling small holes into the concrete and then inserting the foam into the holes. Also, the PolyLevel system is waterproof and long-lasting.