You want your home to be safe and secure; Josh’s goal is to ensure it is by leveling and lifting any uneven concrete.
Concrete settlement is common and can cause significant problems like trip hazards, pooling water, and cracks. Our PolyLevel® is a high-density polyurethane that raises slabs back to a desired level. It can be used for sidewalks, driveways, garage floors, pool decks, and porches.
Bringing a comprehensive, personalized approach to every job, Josh will evaluate your areas of concern and provide a solution to quickly and effectively stabilize your sinking, settling concrete. Josh’s customers recommend him and the Ayers Team to their family and friends.
Josh attended Lansing Community College and Michigan State University. His past experience includes an internship with a civil engineer where he worked with AutoCAD. He also worked in retail where he helped customers solve their problems.
Josh also completed extensive training to evaluate your waterproofing, foundation, and crawl space repair needs. In addition, as part of the service team at Ayers, he responds if you need help after installation and to do annual maintenance.
“Sinking concrete is common in Michigan and is often the result of shifting or a weak soil base or erosion,” said Josh. “We can help level the concrete, eliminating a tripping hazard.”
Originally from Pontiac, Michigan, Josh currently resides in Bath with his wife and two children. Josh is an outdoor enthusiast enjoying fishing and kayaking. He also enjoys spending time with his family and playing video games.
Josh is looking forward to meeting you.
Bob B. called us because the cement slab by his steps on the porch was sinking and it kept getting worse over time. He was worried that someone was going to get hurt so he wanted to see about raising the slab back to it's original height. We sent out a system design specialist to check it out and we were able to do just that with our PolyLevel system.
PolyLevel is a simple repair to sinking concrete slabs on your porch, around your pool, your sidewalks etc. This method uses high-density, structural grade polymers to to raise slabs back to the desired level. Small holes (smaller than a penny), are drilled into the cement and and the polymers are then injected into the void. Once the void is filled the polymers expand and allow the slab to lift. The material is waterproof so it can't get washed out and it cures very quickly and is usually ready about 15 minutes after being done.
Oak Hill Condominium association wanted to ensure that the condo they had for sale was ready for the next owner and would be an easy sale. We did some waterproofing work to the basement and also did some concrete leveling to the sidewalks around the condo.
There's many reasons you should fix your sinking concrete. For example, the problem will continue to get worse, it affects the resale value, it's safety hazard and let's be honest it's not very appealing. Just because your concrete is starting to crack or sink doesn't mean that you have to replace it, we offer a much simpler and less invasive solution.
PolyLevel uses high-density polymers to raise slabs back to their desired level. This is accomplished by drilling small holes in the concrete and then injecting the polymers into the void. The holes are small (about the size of a penny). The material is waterproof so it won't wash out beneath the slab and its cure time is so quick it can be driven on within 15 minutes after installation.
A sump pump is an important asset to your home in so many ways. First off it makes sure that any water that enters your basement gets pumped up and out without causing a mess. Second, it pumps it far enough way that you don't have to worry about that water getting right back into your basement. Today's sump pumps are made with incredible technology that can even alert you in the event it can't keep up and you need to take action.
In this Jackson, MI home we installed our SuperSump sump pump. This sump comes with an airtight lid to prevent the water from evaporating right back into your basement. It also sits on a pump stand so you don't have to worry about mud or debris getting into the sump and causing it to clog up. There is even a pump alarm to alert you if the water level ever gets above the point where the pump normally turns on.
This homeowner has a walkway to the front door that has sunk and is uneven now. They were worried that it would get worse or cause a tripping hazzard so they called us. We used Polylevel to lift the concerete slabs back to the original position. PolyLevel is a strong, light weight foam that is injected under sunken concrete slabs to lift it back up. The foam is is waterproof so it will not wash away and it is stable so it wont react with soil or moisture. It installs quickly with a curing time of abotu 15 minutes, won't disrupt other slabs, and not invasive to your space.
One of our awesome customers from East Lansing gave us a call about the concrete at the front of their house. So we drove out there and noticed that there was some cracking and sagging happening, so we installed our PolyLevel technology which is an advanced polymer injection foam that we blast into the concrete to re-level it and make it stronger than ever. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.
A customer from East Lansing needed our help with improving her foundation. So we drove to her home to inspect how to improve it. After inspection, we decided to install SmartJacks. The SmartJack is a support system used to stabilize and level the floor joists in a crawl space. This system can support up to 60,000 pounds. The SmartJack system is placed on strong concrete fillings that have replaced the soil in that small location underneath the SmartJack. Now this homeowner will never have to worry about having a weak foundation.
Julie called us when she noticed that a slab in her walkway was lifted, causing a tripping hazard. She wanted to add handrails to the steps but needed the walkway to be level first. We used PolyLevel to lift the concretet back to where is should be. PolyLevel is a very light but strong foam injectable. It is waterproof so it won't not wash away, it doesn't react with soil or moisture, and it has a curing time of 15 minutes so there is minimal disturbance.
These East Lansing homeowners had sunken slabs in their driveway and they needed a fix so they called us. We used PolyLevel to raise the sunken concrete and give the homeowners peace of mind that their driveway issues were gone! PolyLevel is an injectable foam that is light weight but strong. It is also waterproof and stable so it wont wash away or react to soil. The best part is that the driveway can be full load bearing in about 15 minutes!
The Michigan Surgical Center in East Lansing has a sunken concrete slab of concrete by one of the doors. The concrete slab had sunken so much that the door doesn't touch the floor where it locks. We used PolyLevel to lift the concrete back to the original position so that the door latch and the hole could connect. PolyLevel is a light weight injectable foam that is waterproof so it wont wash away from under the concrete. The walkway, driveway, or sidewalk can be full load bearing in only 15 minutes after being installed.
Lind contacted us to fix her unlevel sidewalk concrete slabs. We used PolyLevel to raise the sunken slabs and get rid of the trip hazzard. PolyLevel is a lightweight injectable foam that is waterproof so it won't wash away. It also cures in about 15 minutes so that it wont disrupt your day.
This family's home had basement block walls that started to bow and settle. This customer had previous work done with Ayers to stabilize other walls in the basement and had no issues with those walls since. We installed Geolock anchors on the newly bowed walls and tightened the locks on the older anchors. The beauty of this solution is that an Ayers technician can service these anchors by tightening it slowly over time and straightening the walls gradually.
This driveway in Laingsburg, Michigan wsa not level which made it hard to drive on. So, we solved the problem quickly with our PolyLevel technology. PolyLevel is a modern way to lift concrete that results in a more permanent result. It is done by a super tiny injection into the concrete that lifts it up and supports it better than ever before. This driveway is now smooth as silk.
Demeka's home has been giving her problems, such as having cracks and bowed basement walls. Eventually, she called us to assess her problem, it was determined by our specialists that her foundation is slipping. To fix this, our specialists determined that Powerbraces on the foundation walls of her basement would fix the problem permanently.
Chuck and Eva had some sinking concrete between the back porch and the pool. It was a hazard to have the uneven concrete so they called us for a solution. We injected PolyLevel to lift the sunken slabs and level to are by the back porch. PolyLevel is a waterproof foam that cures in just 15 minutes so it doesn't distrub the homeowners!
We received a call from a customer in Dewitt referring to her walkway and how unlevel it was. She wanted our professional help to get the job done. We drove to her home to install PolyLevel which is an advanced polymer injection foam that we blast into the concrete slabs through tiny little holes in the concrete. The foam levels it all out while making it stronger than ever before. PolyLevel worked to raise and level out the concrete slabs while dealing with the weak soils below that were no longer able to hold the weight of the home above. We drilled multiple small holes into the concrete slabs in order to inject them with a polymer material that expanded to lift and level out the concrete. Once injected, the system only needed about 15 minutes to fully cure and the slabs were then stabilized and lifted to their proper level, and stronger than ever before. Now, this homeowner will not have to worry about this ever again.
Having a powerful TripleSafe sump pump in your basement during a flood could mean the difference between a dry floor and a 6 inches of water! Most basements are fitted with the pump on the left which can easily be overwhelmed by an sudden influx of water. Our TripleSafe sump pump provides three levels of protection for your basement: if the first pump is overwhelmed by water, the second pump switches on. If the power goes out, the battery-operated third pump kicks in. The TripleSafe also has a secure lid that keep out any objects that may impede its functioning.
This driveway has an area on the corner where the driveway meets the garage that had fallen about 3/4 inches. The owner wanted a fix because he did not want it getting any worse. We used PolyLevel which is an inject able foam to raise the concrete slab back to the original position. PolyLevel is waterproof and stable so it will not wash away or react with soils. The foam cures in about 15 minutes so you can be back in the garage and on the driveway in no time!
The customer needed help fixing their damp crawl space which had no sump pump and serious moisture issues. The owner had health problems and opted to encapsulate the crawlspace with CleanSpace vapor barrier to sell the home. To ensure that potential buyers would have peace of mind, the owner opted to install our Sedona dehumidifier to ensure the crawl space stayed dry.
James had a large, deep crack in the concrete where the sidewalk and the driveway meet. To fix the problem, we installed PolyLevel. PolyLevel is a system designed to fix concrete slabs that have sunk by using a new product to lift the concrete slabs back to their original level. The new product used is a polyurethane foam that expands and has a high density in order to raise the concrete. The process is simple and minimally invasive. We drill small holes into the concrete and then insert the foam into the holes. The system is waterproof and long-lasting so James's driveway will look fresh for years to come.